User`s manual

WI-FI Network Camera User’s Manual

Web Client

Linkage With Alarm: Check this box to acvate the following acon when the moon is detected.

• Alarm Output: Check this opon to enable alarm output. See “Alarm” on page 29.

• SD-Card Record: Check this opon to save the recorded videos directly into the SD card. See

“SD Card” on page 38.

• Send E-mail: Check this opon to send a nocaon e-mail. See “E-mail(SMTP)” on page 36.

• FTP Upload: Check this opon to upload the snapshots to the FTP server. See “FTP” on page

37.

Set Moon Detecon Area

You can specify up to 3 areas for moon detecon alarm. By default, the whole screen is marked for moon detecon.

To mark the specic area, select the area number in Moon Area Items, and drag the mouse to highlight the scope to

mark the area (yellow block) for moon detecon.

Select Detect All to set the whole screen as the moon detecon armed zone.

Select Clear Detect to clear all marked moon detecon zone.

NOTE: To avoid geng false triggers, it is recommended to set the moon detecon area at an appropriate locaon

such as door, window, etc.

Alarm

Customize the sensor alarm sengs.

External Alarm: Select on to enable external alarm funcon.