User Manual

ENGLISH
Chapter 5: KGUARD Web Client
DVR User’s Manual
73
Note:
Obtain these informaon from your network administrator or your Internet Service Provider (ISP).
5 Set UPnP to On if you are using Universal Plug and Play (UPnP) devices.
Note:
If you cannot use either of the two default ports, 80 or 9000, the specied port may be occupied by other programs
or it is being blocked by your service provider. Enter other port number. In this case, you need to add the port
number aer the IP address. For example, if you set the Web Port as 85, you need to enter the IP address as
“192.168.3.103:85”.
6 To save, click Apply at the boom of the screen.
« TIP »
• To revert to default sengs, click Default at the boom of the screen.
• To cancel any modicaons or close the screen, click .
Seng Up DDNS
DDNS (Dynamic DNS) is a service that registers a domain name and the oang IP address with a DDNS server so that
the domain name can be routed to the IP address even if the IP is changed in a dynamic IP system.
To use this feature, you must have a DDNS account. Obtain the informaon from your Internet Service Provider (ISP) or
create a free DDNS account with KGUARD.org server, visit the website hp://www.kguard.org.
To setup DDNS, do the following:
1 On the Main Menu, click SETUP.
2 On the le panel, click Network > DDNS. The DDNS screen appears.
3 On Status, select Enable.
4 On Service, select the DDNS server.
5 On Host Name, enter the domain name.
6 Enter the User Name and Password.
7 Click Apply at the boom of the screen.
« TIP »
• To revert to default sengs, click Default at the boom of the screen.
• To cancel any modicaons or close the screen, click .