User Manual

ENGLISH
Chapter 5: KGUARD Web Client
72
DVR User’s Manual
3 On Type, select PPPOE.
4 Specify the Media Port, Web Port, DNS1, DNS2 (if necessary).
5 Enter the User Name and Password.
Note:
Obtain these informaon from your network administrator or your Internet Service Provider (ISP).
6 Set UPnP to On if you are using Universal Plug and Play (UPnP) devices.
7 To save, click Apply at the boom of the screen.
« TIP »
• To revert to default sengs, click Default at the boom of the screen.
• To cancel any modicaons or close the screen, click .
Seng Up TCP/IP - DHCP
If your network uses DHCP protocol, do the following:
1 On the Main Menu, click SETUP.
2 On the le panel, click Network. The TCP/IP screen appears.
3 On Type, select DHCP.
4 Specify the Media Port, Web Port and DNS2 (if necessary).