User Manual

ENGLISH
Chapter 4: Using the DVR
48
DVR User’s Manual
4.6 System Sengs
On the SYSTEM menu, you can congure the date and me, user and password, video output, on screen display
language, and maintenance sengs and view the system informaon.
4.6.1 Date and Time Sengs
1 In preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Main Menu > SYSTEM > TIME/DATE.
3 Click the Date box to enter the date (see “3.3.2 Virtual Keyboard” on page 21 for details on using the virtual
keyboard).
4 Select the Date Format.
5 Click the Time box to enter the me (see “3.3.2 Virtual Keyboard” on page 21 for details on using the virtual
keyboard).
6 Select the Time Format and Time Zone.
7 If you want to synchronize the date and me with an NTP server, see “Synchronizing Time with NTP Server” below.
8 To enable Daylight Saving Time, click DST Seng (see “Seng Daylight Saving Time” on page 49).
9 Aer all sengs are complete, click Apply.
10 When data saving is complete, click OK.
Synchronizing Time with NTP Server
1 In preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Main Menu > SYSTEM > TIME/DATE.
3 In NTP, select ON.
4 Select the NTP Server that you want to synchronize with.
5 Click UPDATE NOW.
6 When me update is complete, click OK.
7 Click Exit to close the menu screen.