Owner manual

ENGLISH
Chapter 4: Using the DVR
46
DVR User’s Manual
Note:
For details on supported mobiles, see “DVR SHA Series Support Manual” in the enclosed CD.
4.4.5 Seng Moon Detecon
For added security, enable the moon detecon feature. When moon is detected on a selected area, the DVR issues
an alarm nocaon.
To congure moon detecon, do the following:
1 In preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Main Menu > DEVICE > MOTION.
3 In Channel, select the channel to acvate moon detecon.
3 In Moon Detecon, select Enable.
4 In Sensivity, select the moon sensivity from 1 to 8, wherein in 1 is the least sensive and 8 the most sensive.
5 Click Setup.
6 A grid screen with a green cursor appears. By default, the whole screen is marked for moon detecon (red block).
If you want to disable moon detecon on an area, click the grid cursor and then drag the mouse to highlight the
scope to unmark the area (transparent block) for moon detecon.
7 To close the grid screen, click the right mouse buon.
8 Aer all sengs are complete, click Apply.
9 When data saving is complete, click OK.
When moon detecon is enabled on a channel, the channel screen displays the moon detecon icon
M
.
« TIP »
To copy the current sengs to other channels, select the channel(s) in Copy To and then click Copy.