Owner's manual

ENGLISH
Chapter 5: KGuard Web Client
82
DVR User’s Manual
3 Enter the User Name and Password you use to login to the DVR.
4 On Server Port, enter the monitoring port of your mobile device. The port range is between 1024 to 65535.
Note:
The Server Port specied here must be the same port on your mobile device.
5 To save, click Apply at the boom of the screen.
« TIP »
• To revert to default sengs, click Default at the boom of the screen.
• To cancel any modicaons and retain the exisng sengs, click Refresh at the boom of the screen.
Aer performing the above procedures, install the Kguard mobile device ulity on your mobile device.
See “Chapter 6: Using KView Series Soware” on page 88 for further details.
Moon Detecon Setup
Use the Moon menu to remotely enable and congure moon detecon. When moon is detected on a marked
area, the alarm is triggered.
To congure moon detecon, do the following:
1 On the Main Menu, click Remote Seng.
2 On the le panel, click Device > Moon. The Moon screen appears.
3 On Channel, select the channel where you want to setup moon detecon.
4 On Moon Detecon, select Enable.
5 On Sensivity, select the moon sensivity level from 1 to 8, wherein 1 is the least sensive and 8 the most
sensive.
6 Click Area to display the moon detecon area screen.