User guide

ENGLISH
Chapter 5: KGUARD Web Client
DVR User’s Manual
63
5.5.2 Record Sengs
Use the Record menu to remotely set the recording schedule and quality.
1 On the Main Menu, click SETUP.
2 On the le panel, click Record. The Record submenu appears.
3 On the Record submenu, select the channel to customize or select All to apply the sengs for all channels.
Selected Not selected
Funcon disabled
Item Descripon
Quality Select the recording quality (Best/Beer/Good).
Resoluon Select the type of record mode.
Frame Rate Select the frame rate value between 1 to 30.
Audio Click the buon to turn the recording audio on or o.
Mode
Click to select a record mode. Opons are:
• Power On: To record the video the whole day (24 hours).
• Timed: To record the video only when moon is detected or at a preset me. See
“Seng the Recording Schedule” below.
4 To save the sengs, click Apply at the boom of the screen.
« TIP »
• To revert to default sengs, click Default at the boom of the screen.
• To cancel any modicaons or close the screen, click .
Seng the Recording Schedule
To automacally record a channel at a specied me, do the following:
1 On the Main Menu, click SETUP.
2 On the le panel, click Record.
3 On Mode, select Timed. The Schedule table is enabled.