Manual

ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
33
4.1.2 Output Sengs
Seng LIVE-OUT or SPOT-OUT
This LIVE-OUT and SPOT-OUT funcons allow you to set the number of channels displayed in split mode and order the
display sequence of channels.
1 In preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Main Menu > DISPLAY, then select the Output tab.
3 Modify the necessary sengs:
Menu item Descripon
Video Output Select one of the following:
• LIVE-OUT: To set the video output seng of the main monitor used for live
view display.
• SPOT-OUT: To set the video output seng of the monitor connected to the
SPOT-out connector of the DVR.
View Setup Select Enable to enable view setup.
Note:
When View Setup is enabled, Split Windows funcon is not available (see “3.4.2
Split Mode” on page 27).
View Mode Select how you want to split the windows, opons are: Single, Quarter, Ninth,
Sixteenth.
VOUT Sequence /
SPOT Sequence
Click VOUT Sequence or SPOT Sequence to set the order of how the channels
appear.
Rotate Time Set the interval me (in seconds) when changing screen display in Rotate mode.
See “3.4.4 Rotate View” on page 28.
VGA/HDMI
Resoluon
Select the output resoluon.
Init. DEV
(Inial Device)
Select where you want to display the OSD menu when mulple monitors are
connected to the DVR (Video Out, VGA, or Auto).
Transparency Slide the bar to adjust the transparency of windows.
Volume Click Volume to adjust the output volume or mute the audio.
4 Aer all sengs are complete, click Apply.
5 When data saving is complete, click OK.