User Manual

ENGLISH
Chapter 3: Geng Started
DVR User’s Manual
35
3.7.4 Rotate View
With this funcon, the system will automacally rotate the display through all the channels and split window display.
To enable rotate view:
1 In the preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Start Rotate.
The rotang display starts. By default, each display switches at 5 seconds interval. You can change the switch rotate
me interval in Display menu (see “4.1.2 Output Sengs” on page 40).
An example of the screen display rotaon, as follows (8-channel DVR with 2 available channels):
Full screen
(First channel)
Full screen
(Second channel)
8-window display 4-window display
Note:
The displayed screens vary depending on the available channels.
To disable rotate view:
1 Right-click on the mouse to display the Pop-up menu.
2 Select Stop Rotate.
Note:
Rotate funcon is not available when View Setup is enabled (see “4.1.2 Output Sengs” on page 40).