Manual

ENGLISH
Chapter 5: KGUARD Web Client
98
DVR User’s Manual
4 Set the Protocol, Baudrate, Data Bits, Stop Bits, and Parity.
Note:
Check the PTZ camera specicaons for the correct sengs.
5 Enable or disable Cruise.
6 Set the Address.
7 Aer all sengs are complete, click Save.
« TIP »
• To apply the same recording sengs to other channels, click Copy. See “Copying Sengs To Other Channels”
on page 83.
• To cancel any modicaons and retain the exisng sengs, click Refresh.
5.5.7 Managing System Sengs
On the System Setup menu, you can modify the me zone and view the language used on the DVR and its signal
source.
General Setup
1 On the Main Menu, click Remote Seng.
2 On the le panel, click System > General. The General screen appears.