Manual

ENGLISH
Chapter 5: KGUARD Web Client
96
DVR User’s Manual
Send Email Check to enable email alarm nocaon. If the funcon is enabled, the system will
send the alarm images to the specied email address. See “4.4.3 Email Sengs” on
page 55.
Full Screen Check the box to enable this funcon. If this funcon is enabled and the alarm is
triggered, the corresponding channel will be displayed in full screen. Select the screen
display duraon (1 S/3 S/5 S/7 S/10 S)
Alarm Out If an alarm device is connected, check the box to make the device sound the alarm
when triggered.
Enable Record
Check the box to enable recording when the alarm is triggered.
Post Recording Select the post-recording duraon. Enable Record must be checked to use this
funcon.
Record Channel Check the box of Enable Record and then select the channels to record when the alarm
is triggered.
4 Aer all sengs are complete, click Save.
« TIP »
• To apply the same recording sengs to other channels, click Copy. See “Copying Sengs To Other Channels”
on page 83.
• To cancel any modicaons and retain the exisng sengs, click Refresh.