Manual

ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
55
4.4.2 Remote Stream Setup
The Remote Stream page allows you to enable or disable video output of a parcular channel if the channel is being
viewed via remote access.
1 In preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Main Menu > NETWORK, select the Remote Stream tab. The remote stream framerate sengs are
displayed on a table.
3 Select the channel and adjust the corresponding sengs such as Video, FPS, and Quality.
4 Check the Audio box to enable audio.
5 To copy the current sengs to all channels or one specic channel. Click the arrow on Copy and To to select an
opon and then click Copy.
6 Aer all sengs are complete, click Apply.
7 When data saving is complete, click OK.
4.4.3 Email Sengs
The DVR supports sending of email nocaons when events occur, such as when moon is detected or the HDD fails
at the specied channel, day, and me.
Note:
Be sure that the DVR network connecon is properly congured before proceeding with the email setup.
To set up email, do the following:
1 In preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Main Menu > NETWORK, select the Email tab.
3 On Email, select Enable.
4 Click Schedule to implement the email schedule. For details, refer to “Email Schedule Setup” on page 56.
5 On SSL, select the Enable check box if your email server needs the SSL vericaon. Check with your email service
provider for the applicable seng.