Instruction Manual
ENGLISH
Chapter 5: KGUARD Web Client
DVR User’s Manual
93
Show Message
Check the box to display a message on screen when the alarm is triggered.
Send Email Check to enable email alarm nocaon. If the funcon is enabled, the system will
send the alarm images to the specied email address. See “4.4.4 Email Sengs” on
page 53.
Full Screen Check the box to enable this funcon. If this funcon is enabled and the alarm is
triggered, the corresponding channel will be displayed in full screen. Select the screen
display duraon (1 S/3 S/5 S/7 S/10 S)
Alarm Out
If an alarm device is connected, check the box to make the device sound the alarm
when triggered.
Enable Record
Check the box to enable the post recording opon.
Post Recording Select the post-recording duraon.
Record Channel
Check the box to enable recording and then select the channels to record when the
alarm is triggered.
4 Aer all sengs are complete, click Save.
« TIP »
• To apply the same recording sengs to other channels, click Copy. See “Copying Sengs To Other Channels”
on page 79.
• To cancel any modicaons and retain the exisng sengs, click Refresh.