Instruction Manual

POLARIS MIDSIZE RANGER

Item # Qty. Description

1 1 Rear Bumper

2 1 Bumper Bracket (driver side)

3 1 Bumper Bracket (passenger side)

4 4 Bumper Tube Cap

5 1 Hardware Kit (HK-412)

5.1 2 5/16”-18 x 1.75 Hex Flange Bolt

5.2 4 5/16”-18 x .75 Carriage Bolt

5.3 6 5/16”-18 x .75 Carriage Bolt (black)

5.4 12 5/16”-18 Hex Flange Nylock Nut

Kit Components:

Rear Double Tube Bumper PART #102000

5.1

5.2

5.3

5.4

Figure 1

PAGE 1
POLARIS MIDSIZE RANGER Rear Double Tube Bumper PART #102000 Kit Components: Item # Qty. Description 1 1 Rear Bumper 2 1 Bumper Bracket (driver side) 3 1 Bumper Bracket (passenger side) 4 4 Bumper Tube Cap 5 1 Hardware Kit (HK-412) 5.1 2 5/16”-18 x 1.75 Hex Flange Bolt 5.2 4 5/16”-18 x .75 Carriage Bolt 5.3 6 5/16”-18 x .75 Carriage Bolt (black) 5.4 12 5/16”-18 Hex Flange Nylock Nut 5.4 2 5.2 5.1 5.4 5.3 1 3 5.3 Figure 1 4 ©2022 Copyright Kappers Fabricating, Inc.
PAGE 2
INSTALLATION INSTRUCTIONS Note: Make sure all hardware needed to complete this mount is in the package. Thoroughly read through and understand the instructions before installing. Figure 2 1. Assemble bumper tube caps (4) as shown in Figure 1. A 2. Remove plastic wire clip (A) on drivers side bed frame hinge shown in Figure 2. 3. Using an 11/32” drill bit, drill holes (B) on both driver and passenger side bed frame hinges shown in Figure 2. 4.