Getting to Know Humidifier LED Screen icon C—» c Panel Button Screen Icon A. Switch Button E. No Water Indicator B. Time Bunion F. Humidity Indicator C. Mist Level G. WiFi Indicator D. Humidity Button H. Timer I. Mist Level Indicator 'E.' Note: = When the machine is short of water, the screen will pop out * & and flash red, and the machine will enter the standby state after 3 seconds. 'F.
How to Control Your Smart Humidifier O Power Button + Press to tum on/off your humidifier. Standby mode Working mode Standby mode : CO Press reds & 8 fir wine a ® Timing Function Button « Press repeatedly to switch the dime setting: 1H—2H—4H—8H—Sleep mode; = After the dimer finish, the humidifier will enter the standby state.
(¥ Mist Level Button + Press repeatedly to switch gears ta set the mist size: Low—Medium “High: * The subsequent mist size will default to the size you used last time.
Steps for Filling Water 1. Remove all packaging and take 2. The humidifier should be outplace the user manual, quick guide on a flat surface. de & brush in the water tank. 3. Open the cover and fill in water, 4. Note that water must not ex cor take up the water tank and eed the maximum water level. take it to the tap to add water. ® == 5. Cover the tank cover and plug &. Please insert the wires in a stain the power cord. standard way and keep your hands dry.
Precautions + The machine has a water tank detect function. When the machine is working, picking up the water tank will step spraying. Putting down the water tank will spray again. { Fig.1) © Aka up war ier) JA, op soar: oral ® Page In water dark, 4 DO NOT add essential ills, water treatment fluids or water filters into the water tank and base. (Fg.2 Fig.3} Only add essential oils to the essential oil tank. ( Fig.4 ) DO NOT add water directly to the base. (Fig.5) DO NOT add water through the mist tube.
Cleaning and Maintenance 2. Wipe the atomizer with /£ a cotton swab dipped In | the citric acid solution. 1. Add appropriate amount of water and clean the machine cleaning brush. 4, Remove the upper Ca cover and nozzle in tum, wash with water, and wipe with a damp soft cloth. 5. Wipe with a soft damp cloth and dry with a dry towel. Note: » It is recommended not to use detergent for cleaning.
