Data Sheet

CRC Industries F
rance SAS
12, Bld des Martyrs de Chateaubriant – Z.I. du Val d’Argent – B.P. 90028
F-95102 Argenteuil Cedex. - France
Tél.: + 33 (0)1 34 11 20 00 Fax.:+ 33 (0)1 34 11 09 96
S.A au capital de 1.936.667 € - R.C.S. Pontoise B 391 513 314 – APE 515 L
www.crcind.com
1/2
Nettoyage
industriel
1. GENERAL DESCRIPTION
Treatment of all kind of contacts, without disassembling : sliding contacts, switches, brush
contacts, potentiometers sockets, accumulator clamps, lint-contacts,….
2. FEATURES
• Penetrates and releases quickly all oxides and sulphuric deposits that contaminate
contacts.
• Lubricate the contact surfaces
• Allows an optimal current flow
• Does not deteriorate circuits and restores the electrical constants.
• Eliminates sparks and leaking currents.
• Prevents usage of the metal due to friction.
• Limits the noise of relays and prevents bouncing contacts.
• After evaporation, F2 Special Contacts restores the electrical constants and leaves a
protective film.
• The aerosol is equipped with a special upside down valve, allowing to use the product
in all positions.
• Comes with a handy extension tube for easy access of difficult to reach service points.
• Safe to use on all materials – test before use on sensitive plastics.
3. APPLICATIONS
Electronic market, radio, television, communication, car electricity,…
4. DIRECTIONS
• Do not use on equipment under tension.
• Spray by short impulses on the part to be cleaned.
• Use the extension tube when needed.
• Allow to act for some minutes.
• Wipe of with a lint free cloth or allow evaporating completely.
• In case of important oxidation, repeat the action.
F2 spécial contacts
Cleaning and lubrication of movable, electric and electronic
contacts. Protective action on long term.