User's Manual

52
AP
OR100 Series
This back-up option allows user to either download the device configuration locally
The restore option allows user to restore the device configuration to the uploaded
configuration file.
Restoring the config file to the device will take 30 sec approx.
After uploading the configuration file, the device will load with the new configuration
Upgrade Firmware
To configure Upgrade Firmware, Click Management > Upgrade/ Reset > HTTP > Upgrade Firmware
The firmware upgrade process happens in four phases:
Upload: Select firmware to be uploaded
Verification: Verify the firmware to validate the checksum
Upgrade: Write the new firmware into flash memory
Reboot: Once flash write processes is completed, and then automatically reboot the
device.
The whole firmware upgrade process takes around 6.30 minutes to complete.
When upgrade process starts, all the existing links will be disconnected until it reboots
with new firmware.
Due to the above fact, it is recommended to upgrade all remote devices and then
upgrade the local devices.
TFTP
To configure TFTP, Click Management > Upgrade/ Reset> TFTP > Upgrade / Retrieve
A Trivial File Transfer Protocol (TFTP) server lets you transfer files across a network. By using TFTP,
you can retrieve files from the device for backup or copying, and you can upgrade the firmware or
the configuration files onto the device.