User's Manual

37
AP
OR100 Series
Disable: By, default MAC ACL is disabled in AP (2.4 GHz) Configuration, i.e. all clients are linked to
AP
Allow: If Allow is selected, the MAC ACL feature allows only the authenticated clients to access
the Wireless network of AP by adding their MAC addresses
Deny: If Deny is selected, only a particular client is restricted.
Note: The maximum number of clients that can be added to the MAC ACL table is 32 MAC ACL
feature is applicable only in AP with 5 GHz / 2.4 GHz
Network
IP Configuration in AP/SU
To configure the IP Configuration, Click Network > IP Configuration
Network Mode: Bridge
Bridging:
A bridge is a class of network device that's designed to connect networks at OSI Level 2,
which is the data link layer of a local-area network (LAN).
Note: For AP the Network mode is set as default (Bridge) and in SU Network Mode options
are set as Bridge/ Routing
Address Type Static
A static IP address is simply an address that doesn't change until the device is
decommissioned or your network architecture changes
Address Type Dynamic