User's Manual

36
AP
OR100 Series
User Manual
To configure Security, Click Wireless> 2.4 GHz Radio Configuration > Security
Encryption Type: Select WPA2-PSK
Key: Select any desired key considering the note below.
None: If the encryption type is selected as none, then there exists any security to the data frames
transmitted over the wireless medium
Mobile App: Mobile App is used to configure the Access point remotely
Username: admin (1-32) characters
Password: XXXXXXXX (8-32) characters
Note: One Special characters allowed for configuration! @ ^ * - _ + : , . { } [ ]
MAC-ACL
To configure MAC ACL in AP, click Wireless> 2.4 GHz Radio Configuration> MAC ACL
This section has MAC status: Allow/ Deny/Disable and a MAC ACL table: MAC Address