User's Manual

32
AP
OR100 Series
User Manual
To configure DDRS/ATPC, Click Wireless> 5 GHz Radio Configuration > DDRS/ATPC
Select the Spatial stream as either as Auto, Single, or Dual.
Dual Stream: Select Dual for higher throughput.
Single Stream: Select Single for reliability and longer range.
Auto Stream: When you select Auto, DDRS decides the stream modes based on the environmental
conditions.
Note: The data rate can be varied from min to max based on SNR and Retransmission
percentage.
ATPC
To configure ATPC, Click Wireless> 5 GHz Radio Configuration > ATPC
When you enable the Adaptive Transmit Power Control (ATPC), the device automatically adjusts
the transmit power to avoid saturation of remote receiver which could cause data errors leading
to lower throughput and link outage. When you disable the ATPC, manually adjust the transmit
power. The range should be between (1-26) dbm
Security
The Wireless Security feature helps to configure security mechanisms between AP and SU.