User's Manual

24
AP
OR100 Series
User Manual
Note: On Selection of country code and specific frequency/channel within the DFS band, the DFS
functionality is enabled automatically.
Operational Mode: 11AC
Bandwidth: 20/40/80MHz
Given the above options, the admin has the flexibility to select the bandwidth. In general, 2.4GHz
radio can have a bandwidth of 20 MHz i.e. for short distances. 5GHz radio can have 40 MHz/
80MHz bandwidth. Advantages of a 5 GHz with 40 MHz/ 80 MHz bandwidth are; it is tuned for
faster speed; more data can be transferred and less signal interference.
Channel: Several Wi-Fi Channels and their numbers were pre-defined to achieve the best
performance.
 Bandwidth and Channel Parameters are available only in AP.
 The default channel is 120(5600 MHz) when Outdoor base is selected in radio
mode. The SU after scanning should be updated automatically with the same
parameters as AP, this is possible only when SSID and Country parameters are
same in both AP a SU.
2.4 GHz Radio
To configure the 2.4 GHz Radio, Click Quick Start> 2.4 GHz Radio
Radio Mode: Access point
Service Set Identifier (SSID)