User's Manual

22
AP
OR100 Series
User Manual
 In access mode, tagged frames with specified Access VLAN ID are going out of the device
through the Ethernet interface were untagged and forwarded.
 The untagged frames coming into the device through the Ethernet interface are tagged
with specified Access VLAN ID and forwarded.
Q-in-Q
To configure the VLAN Q-in-Q in SU, Click Quick Start> System
 This mode is well known for its double tagging or stacking.
 The Q-in-Q mechanism allows Service Providers to maintain customer assigned VLANs
while avoiding interference with the Service providers VLANs.
 Using the Q-in-Q mechanism, a SVLAN ID is added to manage VLAN ID, such that
interference is avoided, and traffic is properly routed.
Location
To configure the Location, Click Quick Start> Location
This section consists of the basic profile information of customer’s device, such as Customer Name,
Customer Location, Customer Email, Customer Phone, Base Station ID and Link ID.
Note: The major difference in AP and SU location parameters is that the SU have a Link Id which is
used to link to the AP.