Instructions / Assembly

5
Parts Description
FRONT VIEW
REAR VIEW
Front panel
Carrying Handle
(both sides)
Air outlet
Control panel
Air outlet
Upper air filter
(Behind the grille)
Upper air intake
Lower air filter
(Behind the grille)
Lower air intake
Power cord buckle
Carrying Handle
(both sides)
Pump drain ou let t
Drain outlet
Power plug socket
Bottom tray
drain outlet
*
difference to the promotion information and actual appliance. Please refer to
the real appliance purchased, Thank you.
*
under cooling mode; 5~27℃(41~80°F)under heating mode.
The descriptions in this user manual are text and figures may have slightly
The woking temperature range of the air conditioner is 16~35℃ (60~95°F)
NOTE:
Install the exhaust duct into the window
Remove the unit with the packed exhaust duct next to
the window, and then connect the adaptorB (flat mouth)
of the exhaust duct with the window.(Fig.E)
Fig.E
Installation
12
Screw B
3.Carefully lower the window. Secure the vent panel in place with 4 type B screws,plus
one screw for each extension.
Foam
Seal
4.Cut the foam seal B(non-adhesive) to the window width. Stuff the foam seal B between
the glass and the window to prevent air and insects from getting into room.
5.Install the security bracket with a type B screw, as shown.