User Guide

Once it is open, click on the USB Devices tab. You will notice your USB device located under
the Other Devices heading (see next image):
Tech Note : The USB device's name that is shown is the name that is programmed
into your USB device by its manufacturer. This name may different from the actual
name and model number of your device. For example, if you have a HP Deskjet 882
printer, it may appear as HP Deskjet 880 or HP Printer. Some USB devices do not have
any names programmed into them. For 'unnamed' USB devices, the USB device's
programmed Vendor ID (VID) and Product ID (PID) will be shown.
TROUBLESHOOTING : If you do not see your USB device in the Keyspan USB Server
application, please proceed to the Troubleshooting :USB Devices section in this manual.
Step 2 - (Virtually) Connecting Your USB Device
In the Keyspan USB Server application, the Other Devices area shows USB devices that are
connected to the USB Server but require further action in order for you to use them. To use your
USB device, you must first "connect" to it. To do this, click on your USB device under Other
Devices and then click the CONNECT button as shown below:
Keyspan:USB Server - User Manual
This User Manual applies to the Keyspan USB Server Software Version 1.0
Rev 2004apr06 Page 8