User Guide
3 Using Your USB Devices On The Network
Overview
In this section, you will learn how to use your USB devices via the Keyspan USB Server. You
will learn to:
connect your USB device (
hardware
) to the Keyspan USB Server's USB port
virtually connect to your USB device using the Keyspan USB Server
software
use your USB device via the Keyspan USB Server
Tech Note:
These instructions are intended to you connect your USB device (ie
printer, scanner, etc.) to the USB Server for the
very first time
. It is
highly
recommended
that you only connect one USB device at this time. To connect
additional devices, repeat these instructions for each device.
Using Your First USB Device
Step 1
-
Connecting Your USB Device To The USB Server
Before using the Keyspan USB Server, connect your USB device (ie printer, scanner, etc.) to any
USB port on the Keyspan USB Server.
Once your USB device is connected to the USB Server, open the
Keyspan USB Server
application.
MACINTOSH
:
The
Keyspan USB Server
application is located in your
Applications
folder.
WINDOWS
:
The
Keyspan USB Server
application is located in your
START
menu
->
PROGRAMS
->
KEYSPAN USB SERVER
.
Keyspan:USB Server - User Manual
This User Manual applies to the Keyspan USB Server Software Version 1.0
Rev 2004apr06 Page 7