User Guide

available for your USB Server hardware. We recommend that you update your firmware
now. To do this, please follow the instructions on-screen instructions to update your
firmware. Once the update is complete, proceed to Step 3.
Tech Note: If you have multiple unconfigured USB Servers on your local network,
you can determine which server you are configuring by looking at the serial number
presented by the Keyspan USB Server application. This number correlates to the MAC
address that is printed on the bottom of your USB Server hardware.
TROUBLESHOOTING : If you do not see any USB Servers in this window, please proceed to
the Troubleshooting :Network Issues section in this guide.
Step 5 - Software Installation Complete!
Keyspan USB Server software is now complete.
You may now proceed to the Using Your USB Devices On The network section in this
guide.
Uni nstall Instructions
If you need to uninstall Keyspan USB Server software, please follow these instructions:
MACINTOSH :
Run the "UninstallUS4A.pkg" uninstaller program. This program is located on the CD that
came with your USB Server. You can also download the uninstaller from Keyspan's web
site.
WINDOWS :
Uninstall the Keyspan USB Server software using the the Add/Remove Programs
control panel. (located in START menu -> SETTINGS -> CONTROL PANEL ). Once
the Add/Remove Programs control panel is open, locate and select the Keyspan USB
Server software and then click the Change/Remove button. Follow the instruction on-
screen to complete the uninstall.
Keyspan:USB Server - User Manual
This User Manual applies to the Keyspan USB Server Software Version 1.0
Rev 2004apr06 Page 6