User Guide

You should be back at the Advanced Settings window. Click the Add button to create a new
Service Settings window.
We will now enter your TCP information (from Step 1).
While in the Service Settings window, enter something descriptive like 'Keyspan USB TCP' in
Description of Service field. Enter your IP address in the IP address field. Enter your UDP port
number in both the External Port and Internal Port fields. Click the TCP radio button. You
window should look like the following image:
Lastly, click the OK button to save your changes.
Close Remaining Windows
Click the OK buttons on the remaining windows to finish up.
Step 4 - Firewall Configuration Complete!
Your firewall is now configured to allow access to the Keyspan USB Server. If you have multiple
computers, please repeat these steps for every computer that will access the USB Server.
Keyspan:USB Server - User Manual
This User Manual applies to the Keyspan USB Server Software Version 1.0
Rev 2004apr06 Page 42