User Guide

IMPORTANT NOTE : If the Configure pop-up menu is set to Default , DHCP , or
Zeroconfig , please note that your IP address is obtaining an IP address
dynamically. Dynamic addresses can change at any moment making it harder for
firewalls to keep track of. If you have need to use a firewall, we suggest that you
configure your server to use a Static IP address.
Now that you have your IP address, proceed to Step 2.
Step 2 - Access Your Firewall Software
First locate your network connection's icon. To do this, go to the START menu, then to
SETTINGS, then to Network. You should see an icon for your network connection (it is usually
called Local Area Connection). When you see your network connection icon, right-click it to bring
up the sub-menu (see next image):
In the sub-menu, select Properties . This will open the [Local Area Connection] Properties
window. Click on the Advanced tab and then click the Settings button (see next image):
This will open the Advanced Settings window.
Keyspan:USB Server - User Manual
This User Manual applies to the Keyspan USB Server Software Version 1.0
Rev 2004apr06 Page 40