User Guide

Once the USB Server has power, you will notice the USB Server's status lights turn on and off.

After a few seconds, the lights will stop blinking. If the USB Server is responding properly, the

four green USB lights will turn on and stay solid. You should also notice that the first green

SYSTEM light will blink on and off every few seconds. Ignore any other status lights for now.

Tech Note:

The LEDs on the USB Server can also indicate other status such as IP

configuration type, server status, etc. For a detailed description of what the LED lights

indicate, please read the

Status Light Behavior

appendix in this manual.

TROUBLESHOOTING

: If you do not see the USB lights turn on and/or do not have a

blinking green SYSTEM light, please proceed to the

Troubleshooting

:Status Lights

in this

manual.

Keyspan USB Server hardware installation is now complete. Please proceed to the USB Server

software installation instructions.

Installing the USB Server Software

Tech Note:

The following instructions outline the installation of the USB Server

software for both Mac and Windows operating systems. Where instructions are

different for one operating system, the difference will be noted. Although screen shots

of the Keyspan USB Server software may not match to your operating system, please

note that button, menu, and tab names are identical on both platforms.

Step 3

Insert the Keyspan USB Server CD-ROM

Turn your computer ON. When your computer starts up, p

lace the

Keyspan USB Server

Keyspan:USB Server - User Manual

This User Manual applies to the Keyspan USB Server Software Version 1.0

Rev 2004apr06 Page 4