User Guide

Config: Check Server Firmware/Firmware Update
This selection will allow you to check and update the firmware on
USB Server hardware. For details, please see the Updating
Your Firmware sub-section later in this section.
Config: Apply/Restore Server Config (WINDOWS)
Only found in the Windows version, these selections will apply
any changes made to the USB Server's settings or restore the
server to default settings. These functions are identical to Apply
and Restore buttons found in the Admin tab.
Config: Refresh
The Refresh selection will refresh the USB Device or Admin tab
contents. This will force the USB Server software to obtain the
current status of the USB Server hardware.
Updating Your Firmware
The Keyspan USB Server's firmware can be updated at any time via the Keyspan USB Server
application.
To do this, select the Admin tab, select your USB Server, and then click the Edit Config button.
If your USB server requires new firmware, you will receive a pop-up window with instructions on
how to update the server's firmware.
To manually update your server's firmware, select the Admin tab, select your USB Server, and
then click the Edit Config button. Then choose Check Server Firmware from the Config
menu (see next image). Follow the instructions on-screen to update the server's firmware.
MACINTOSH :
The Check Server Firmware selection is called Firmware Update in the Mac software.
Keyspan:USB Server - User Manual
This User Manual applies to the Keyspan USB Server Software Version 1.0
Rev 2004apr06 Page 19