USER MANUAL Model : SX-18D (Version 1.
Table of Content Introduction 1. FUNCTIONAL DESCRIPTION 1.1 Buttons 1.2 LED Indication 1.3 LCD Display 1.4 Connectors 2 2 2 2. PRODUCT SPECIFICATIONS 2.1 Technical Specification 2.2 Electrical Specification 2.3 Product Specification 2.4 Minimum PC system requirement 2.5 Accessories Bundling 3 3 3 3 3 4 3. USER INTERFACE DESCRIPTION 3.1 Buttons Description 3.2 LED and LCD Description 3.3 Connectors Description 3.3.1 Mini USB connector 3.3.2 SD/MMC/MS/SMC/XD Memory card slot 3.3.
INTRODUCTION STORXtreme is an integrated solution that provides external hard disk drive, card reader and memory card backup functions. As a portable external storage device, STORXtreme is a perfect choice for active mobile users providing a light and optimal solution for personal information storage and transfer. Any PC with a USB port is enough for user to access documents, music, images, or any other data stored in the internal hard disk drive.
Chapter 1 : FUNCTIONAL DESCRIPTION This section describe the various parts and functions of the device. You may refer to Chapter 3 : User Interface Description for detail description. 1.1 Buttons Button Activation [POWER/SELECT] Press & Hold Press & Hold Press Power On Power Off To select the the device operations [ENTER] Press To execute the selected operation [RESET] Press Reset the device 1.2 Operation LED Indication LED # Definition 1 [HDD] 2 [CARD] 1.3 LCD Display 1.
Chapter 2 : PRODUCT SPECIFICATIONS 2.1 Technical Specification Copy mode Data Transfer Rate CF to HDD SD to HDD : 3MBps : 2.5MBps (2x) , 3.4MBps (ultra speed) MMC to HDD : 1 MBps MS to HDD : 0.5 MBps MS Pro to HDD : 3.5 MBps USB Transfer Rate This is a high speed USB device.
2.
Chapter 3 : USER INTERFACE DESCRIPTION 3.1 Button Description Button Activation Operation Mode [POWER/ SELECT] Press Hold Standalone Press and hold this button for 3 seconds to power ON/OFF the device. [POWER/ SELECT] Press Standalone Press to select the operations (eg. COPY, DELETE) [ENTER] Press Standalone Press this button to execute the selected operation (eg. COPY, DELETE) [RESET] Press Standalone Press this button once to reset the device 3.
3.3 Connectors Description 3.3.1 Mini USB connector Plug in the mini USB cable into this connector and the other end of the cable to the PC or the notebook’s USB port. Use the mini USB cable that bundle with this device. The device is compliance to USB 2.0 as well as USB1.0 specification. Notebook connector view 3.3.2 SD/MMC/MS/SMC Memory Card Slot (Slot #1) This slot supports memory card such as Secure Digital card, Multimedia card, Memory Stick, Memory stick PRO.
3.3.4 44-pin Connector Install the 1.8” Hard disk drive into this connector as shown in the picture below. Ensure that the hard disk drive is connected in the correct direction. 3.3.5 Battery Compartment Select the type of AA battery used : Alkaline or NiMH Rechargeable Batteries. Do not mix the battery type, and remember if you are using rechargeable batteries, make sure they are fully charged before use. * Select type of battery. * Insert the batteries and close the cover.
Chapter 4 : DEVICE OPERATION 4.1 Standalone Mode (Copy) Step 1 : Power ON the device by pressing [POWER] button for 3 seconds. The LCD will turn on, the {INSERT CARD} icon will flash prompting you to insert a Memory Card. Step 2 : Insert the memory card (eg. SD card) into the appropriate media slot, the device will detect the type of Memory Card inserted, and its data size and show them on the LCD. The {COPY} icon will flash prompting that the device is ready for data backup.
If an error occurs during copy, the [ERROR] icon will appear on the LCD, you may then repeat the copy sequence. When a copy error occurs, the sub-folder created in the [FILE] directory is empty, you may ignore and delete it. Note : In the unlikely event that the data backup fail, the copy operation will stop, and the {ERROR} icon will show on the LCD, you may choose to repeat the operation. NOTE : The device Standalone Copy Mode support only FAT file system.
Chatper 5 : WINDOWS 98SE/ME INSTALLATION 5.1 § § 5.2 Operating System Supported Windows 98 Second Edition (SE) or Windows Millennium Edition (ME) The device driver can be found in the “Win98SE Driver” directory in the Installation CD Install Device Driver on Windows 98 SE / ME § Connect the device to PC via USB connection. § Power up the device. The system will detect “NEW HARDWARE FOUND” and prompt user to install the device driver.
- Select the directory path “F:\Win98SE driver” (where F:\ is your CD-ROM drive) and click Next - Follow through the online instruction … User Manual 11
§ 5.3 Upon installation of the device driver, you will notice 3 icons appear on the “My Computer” screen. Refer the section on “Installing new hard disk on Win98SE / ME & configure new hard disk drive in Win98SE / ME” if user do not see your hard disk drive icon. Verify Win98SE/ ME has properly installed the device driver q q q q q q q q 5.4 § § § § § § Click on the My Computer icon by right-click on the mouse. Select the Properties item.
5.5 Installing New HDD on Windows 98SE / ME § When a new HDD is installed to this device, Windows 98SE or ME cannot recognize it as local drive because the new HDD does not contain the Master Boot Record and Primary Partition Record information. o User can either use Windows 2000 or XP system to create hard disk drive Master Boot Record & Primary Partition Record, or o User can use Window98SE /ME to configure the new hard disk drive as a Removable drive.
- Check that INSTEP EzII DRIVE0 is present, - Click on the Start, Program, Accessories and select MS-DOS prompt item, User Manual 14
- Type FDISK in the MS-DOS prompt dialog box, - If you cannot get to this screen, reboot the system and try again. Type to enable large disk support.
- 1~3 will depend on the number of HDD present in the computer. Since 20GB HDD is used in this example, enter the choice <2> to change the current fixed disk drive.
- Enter to create Primary DOS partition on current fixed disk drive 2, - Enter to use maximum available size for a Primary DOS partition, - Press [ESC] after Primary DOS partition is created, User Manual 17
- Press [ESC] to exit fdisk, you must then Reboot the computer. 5.7 Format New HDD in Windows 98SE / ME - You must reboot the computer after perform fdisk. Ensure the new HDD is enumerated and the OS will assigned a letter to the new HDD. - Reboot the computer again once the computer has successfully detected the new HDD before formatting it, - Click on the new Local Disk (L:) icon by right-button mouse, - Select the Format option.
- Choose the Full for “Format type” , - You will notice the new HDD is formatting , - Reboot the computer again to let the OS initialize the new formatted HDD.
Chapter 6 : WINDOWS 200x / XP INSTALLATION 6.1 Operating System Supported Windows 2K & Windows XP Supported by Microsoft default driver. (Requires service pack from Microsoft Windows Update website) § § 6.2 Verify windows has properly installed the device driver § Connect the device to PC via USB connection. § Turn ON the device. Windows will detect “NEW HARDWARE FOUND” and the Operating System (OS) will automatically install the Mass Storage device driver.
6.4 Create Master Boot Record on the new hard disk. - Login the PC as Administrator, - Click on the My Computer icon by right-click on the mouse and choose the Manager item, - Or click on the Control Panel icon and follow by Administrative tools.
- Click Next in the write signature prompt and Upgrade Disk wizard prompt, - Tick on Disk 1 option and follow through the instruction, - The new HDD will create a Master Boot Record on the new hard disk, - Proceed to create a new primary partition.
6.5 Create Primary Partition Record on the new hard disk. - After the HDD has created Master Boot Record (write signature), you nee to create a primary partition on your new hard disk. - Click on the Disk 1 Unallocated bar by right-click of the mouse. - Choose the Create Partition option, follow by Next, Note : Windows XP and Windows 2000 cannot support More than 32GB for FAT32 file system.
- Choose the Primary partition option and let system assign the drive letter , User Manual 24
- Choose the FAT32 format, Default allocation unit size and follow through the on-screen instruction. - Note : Do not choose NTFS because the device Standalone Copy Mode support only FAT or FAT32 format. - The new HDD is formatted and ready to be used.
