Technical data

Operation Manual ACK-3400 BT & 595 BT
E&OE 15
• If your PC is running Windows 98 (SE), ME, 2000, XP (SP2) and Vista and the IC of your Bluetooth adapter is
from manufacturer ISSC (Integrated System Solution Corp.), please first install the Bluetooth driver software
BlueSoleil (IVT).*
• If your PC is running Windows 98 (SE), ME, 2000, XP (SP2) and Vista and the IC of your Bluetooth adapter is
from manufacturer Broadcomm, please first install the Bluetooth driver software WIDCOMM.*
* For details, see the documentation of your PC, your built-in Bluetooth module or your Bluetooth adapter.
Advice:
The most Bluetooth keyboards cannot work under BIOS or DOS environment, because the Bluetooth adapter
works only in HID mode (Human Interface Device).
For this a dual Bluetooth USB adapter would be necessary, which supports both HID and HCI mode (Host
Controller Interface.
2.3 Keyboard Installation
Ensure for the further procedure that the used Bluetooth driver software was installed correctly on your PC.
• If you haven’t done yet, remove the covering of the battery case on the bottom of
your keyboard. Insert the included batteries of type AAA 1.5 V
considering the right polarity in the battery case (see picture).
• Switch the I/O sliding switch to ON position!
2.3.1 Keyboard installation under Bluetooth driver software BlueSoleil
• Left-click the Bluetooth icon in the system tray area
of PC.
• Now opens the menu window of BlueSoleil software.
• After opening the menu turn the sliding switch back side of the
keyboard to ON position and afterwards press 1× the Pairing
button.
• On the front side of the keyboard the Pairing-LED should flash
rapidly indicating the pairing mode.