Datasheet
Page 22
Find us at www.keysight.com
Accessories
The following accessories are included with the hardware kit:
Add-on item Quantity
Accelerometer and gyroscope sensor 1
MEMS pressure sensor 1
Croc clip to 4mm banana plug, 36 inches, 5A (red) 1
Croc clip to 4mm banana plug, 36 inches, 5A (black) 1
Phoenix (8-way) connector to banana plugs (one red, one black) 1
9V battery connector to banana jacks (one red, one black) 1
Test lead, 4mm banana plug to 4mm banana plug (black) 2
Test lead, 4mm banana plug to 4mm banana plug (red) 3
Jumper wires (female to male), 30cm, 10 per pack 1
Banana jack (female, red) to 1 pin female jumper connector 1
Banana jack (female, black) to 1 pin female jumper connector 1
Shunt resistor assembly 1
The following accessories are not included and optional for lab activity:
Item Quantity
9V rechargeable battery 2
Solar panel 5-10W, 12-18V (open circuit) 1
Accessories
Lab sheets
Required Instruments and Software
Lab sheet topic Option 1: Basic Lab Option 2: Advanced Lab
1. Setting Up IoT Gateway and Connecting Sensor Network to the Cloud: From sensor nodes to
cloud
No No
2. Characterizing IoT Sensor Board (Device) Static and Dynamic Power Consumption Yes, DMM Yes, DMM, DC power
analyzer
3. Evaluating the Impact of Dynamic Current Drain and Solar Energy Harvesting on IoT Battery
Life
Yes, DMM Yes, DMM, DC power
analyzer
4. Optimizing Power Consumption and Efciency Using Dynamic Power Management in Sensor
Networks
Yes, DMM Yes, DMM
5. Characterizing MEMS Accelerometer and Gyroscope Sensors, and their applications. Yes, oscilloscope Yes, oscilloscope
6. Characterizing MEMS Pressure and Temperature Sensors for Applications in Harsh
Environment
Yes, oscilloscope Yes, oscilloscope
7. Gesture Control using Inertial Measurement Unit (IMU) No No