Datasheet

6 Keysight U2751A User’s and Service Guide
General Safety Information
WARNING
– Do not operate the device around explosive gas, vapor, or dust.
– Observe all markings on the device before establishing any connection.
– The device is under CAT I measurement category, do not connect the
25-pin connector to MAINS.
– Do not measure higher than the rated voltage (as marked on the device).
– Do not operate the device with the cover removed or loosened.
– Use only the power adapter provided by the manufacturer to avoid any
unexpected hazards.
CAUTION
– Electrostatic discharge (ESD) can cause damage to the components in
the instrument and accessories. The cables or wires should be connected
to the plug-in connectors first and covered with the wire casing prior to
plugging it into the output connector to prevent ESD from occurring.
– If the device is used in a manner not specified by the manufacturer, the
device protection may be impaired.
– Always use dry cloth to clean the device. Do not use ethyl alcohol or any
other volatile liquid to clean the device.
– Do not permit any blockage of the ventilation holes of the device.
CAT I:
Maximum working voltage:
Standalone 35 Vrms
Modular (Used with U2781A) 180 Vrms
Maximum transient voltage: 300 Vrms