Datasheet

1 Getting Started
30 Keysight U2751A User’s and Service Guide
U2922A Terminal Block Installation
This section provides the recommended procedure for connecting the U2922A
terminal block to the U2751A.
WARNING
– The maximum working voltage of the U2751A with the terminal
block for standalone is 35 Vrms and for modular (when used
with the U2781A) is 180 Vrms.
– The maximum transient voltage is 300 Vrms.
– Do not remove the retractable cover from the U2922A terminal
block during operation to avoid any unexpected hazard.
NOTE
– You are required to connect the cables to the U2922A terminal block prior to
attaching the U2922A to the U2751A.
– Ensure that you power-off your device and unplug the U2922A from the
U2751A to change the cable connection on the U2922A.
Connect the cables to the terminal block as
desired.
cables