Datasheet

54
Increases productivity and accuracy in automated testing
– Four-quadrant operations well suited for a wide range of test applications
with just a single SMU
– High measurement
sensitivity of 100 pA with
16-bit resolution allowing
you to source and measure
down to pico levels
– 0.1% accuracy for getting
more accurate analysis and
measurement results
– Flexible standalone or
modular capability enables you to have lower startup cost
– SCPI and IVI-COM supported and a wide range of ADEs compatibility
minimize your work time and increase software options
– Easy-to-use KMM software that includes the command logger function that
helps you easily convert SCPI commands into snippets of VEE, VB, C++, and
C# code
Features
– Three-channel SMU
– Four-quadrant operation (±20 V)
– Maximum current output of 120 mA
per channel
– Embedded test script (able to
support three channels with
coherent source and measurement
capabilities) (for U2723A)
– IV Curve application support in the
Keysight Measurement Manager
software (for U2723A)
– Faster rise/fall time (for U2723A)
– High measurement sensitivity of 100
pA with 16-bit resolution
– 0.1% basic accuracy
– Low current measurement capability
down to nA levels
– Voltage and current programming/
readback
– USB 2.0 and USBTMC-USB488
standards
– Command logger function
– Wide range of Application
Development Environments (ADEs)
compatibility
– Standalone and modular
– SCPI and IVI-COM supported
Introduction
The Keysight U2722A/U2723A USB modular source measure unit is more than
just a power supply – it has fast response time, and has voltage and current
programming/readback with high accuracy measurement capabilities. The U2722A
and its enhanced version, the U2723A are capable of four-quadrant operation,
acting as current source and also as current sink (load) with both polarities of
the output voltage. The U2723A offers additional features such as embedded
test scripts to simplify automated testing and faster rise time to help improve
throughput during mass testing of semiconductor component.
U2722A/U2723A USB Modular Source Measure Unit
Four-quadrant operations with high measurement sensitivity
and accuracy
The U2722A/U2723A SMU is a versatile device that allows you to perform sweep
and measurement from different operating regions with just a single device without
extra configurations. The four quadrant-operation (±20 V)
makes the U2722A/U2723A well suited for a wide range of test applications
including leakage measurement, solar cell measurement, forward/reverse voltage,
curve tracer transistor, and many others. Besides being versatile, the U2722A/
U2723A offers high measurement sensitivity with 16-bit resolution and accuracy
that allows you to obtain more accurate analysis and measurement results.
Memory List
The U2723A USB Modular Source
Measure Unit provides an embedded
test script to help you pre-define test
configurations or duplicate tests easily
without spending too much time on
programming.
Each channel in the U2723A USB
Modular Source Measure Unit
is allocated two memory lists,
each capable of storing up to 200
commands and results individually.
Stored commands in active memory
will be executed accordingly while
the measurement results obtained
are automatically stored in the result
buffer.