Datasheet

33
Various features to meet industrial demands
– Quick and easy USB setup
– High channel count to drive
more actuators and control more
sensors by using just one DIO
device
– Opto-isolation for more reliable
and improved signal quality
– High isolated transient voltage
protection of the digital IO lines is able to protect your system from being
damaged
– Wide input voltage range of 10 V to 24 V to sense the status of external
sensors
– High output voltage range of 5 V to 35 V provides the capability to drive a
wide array of actuators in industrial automation applications
– On-board isolated +5 V power supply enables simple application and function
tests without the need for an external source
– SCPI and IVI-COM supports and compatibility with a wide range of ADEs
minimize work time and provides a higher flexibility of software choices
– Command logger function provided in the bundled software allows easy
command conversion into snippets of VEE, VB, C++, and C# code
– Interrupt function for automatic triggering of your system when a digital
change of state occurs
– Virtual Port grouping function allows grouping of any eight input/output bits
into one virtual port for simultaneous operations
Introduction
The Keysight U2600A Series USB isolated digital I/O devices are high-performance
modules that consist of three models— the U2651A isolated 32-bit DI and 32-bit
DO, U2652A isolated 64-bit DI, and U2653A isolated 64-bit DO. The U2600A Series
provides up to eight channels with 64-bit of high-density opto-isolated digital
input and digital output for USB 2.0 interface-based industrial applications, such
as driving relays, actuators, or valve. The U2600A Series targets a wide range of
applications both in industrial automation and education.
Features
– Hi-Speed USB 2.0 (480 Mbps)
Functions as standalone or modular
unit
– Up to 64 opto-isolated digital
I/O lines with maximum transient
voltage of 1250 Vpeak protection
– Supports input voltage ranging from
10 V to 24 V
– External supply voltage ranging from
5 V to 35 V for external load
– Compatible with a wide range of
ADEs
– Supports SCPI and IVI-COM
– Easy-to-use bundled software
– Command logger function
– USB 2.0 and USBTMC-USB488
standards
– Interrupt function
– Virtual Port grouping function
U2600A Series USB Modular Isolated Digital I/O Devices