Datasheet

25
Various features of the U2500A Series
– Quick and easy USB setup
– High sampling rate of up to 2
MSa/s for each channel
– Dedicated analog-to-digital
(ADC) that allows simultaneous
sampling of data
– Flexible standalone or modular
capability that enables lower
startup cost
– SCPI and IVI-COM supported with a wide range of ADE compatibility that
minimizes work time and increases software choices
– Easy-to-use application software and command logger function for easy SCPI
command conversion into snippets of VEE, VB, C++, and C# code
Features
– Simultaneous sampling with up
to 2 MSa/s sampling rate for each
channel
– Multifunction DAQ solution — AI,
AO, DIO, counter
– Dedicated ADC per channel
– 14-bit or 16-bit resolution
– 24-bit programmable digital input/
output
– Functions as a standalone or
modular unit
– Supports SCPI and IVI-COM
– Compatible with a wide range of
ADEs
– Easy-to-use bundled software
– Command logger function
– USB 2.0 and USBTMC-USB488
standards
High sampling rate of up to 2 MSa/s
The U2500A Series provides a high analog input sampling rate coverage of up to
2 MSa/s for each channel. The high sampling rate coverage offered is ideal for
transient signal applications such as sonar analysis.
Simultaneous sampling of data
The U2500A Series has dedicated ADCs that enable simultaneous signals
acquisition, which makes the U2500A Series suitable for your phase-sensitive
applications.
U2500A Series USB Modular Simultaneous Sampling Multifunction
DAQ Devices
Introduction
The Keysight U2500A Series USB simultaneous sampling multifunction data
acquisition (DAQ) devices are high-performance modules that consist of three
models — the U2531A, U2541A, and U2542A. The U2500A Series provides up to
four channels with resolutions of 14-bit and 16-bit. The U2531A can sample up to 2
MSa/s for each channel with a resolution of 14 bits, while the U2541A and U2542A
can sample up to 250 kSa/s and 500 kSa/s for each channel respectively with a
resolution of 16 bits.