Datasheet

Page 4
Find us at www.keysight.com
Introducing the U2000 Series USB Power Sensors
DUT
USB sensor
Trigger signal
Compact “power meters”, simple
set-up
The U2000 Series are standalone sensors.
That means they essentially operate like
power meters, just in smaller forms. No
reference calibrator is required. The fact
that each sensor draws minimal power
from a USB port—and that it doesn’t
need additional triggering modules or
power adaptors to operate—makes it
more portable, especially for base station
testing. Setting up is easy: just plug it
to the USB port of your PC or laptop—or
even select network or handheld
spectrum analyzer—and start your
power measurements. The figure below
illustrates the very simple, straightforward
setup of the U2000 Series.
The U2000 Series enable simpler,
lower-cost power measurements
versus conventional power meter and
sensor combinations. Now with nine
high-performance models, the U2000
Series USB power sensors offer compact,
high-performance solutions for today’s
CW and modulated signals.
High accuracy
Each U2000 Series sensor provides
excellent linearity, SWR and uncertainty
specifications, so you can be confident in
every measurement you make.
Wide range, high power
The U2000 Series’ dynamic range spans
across a wide 80 dB, taking on high power
up to +44 dBm.
Remote monitoring and tests
With the U2000 Series sensor
plugged to a networked USB hub,
you can conveniently monitor power
measurements of an antenna tower from
the control room, beyond the limits of
USB cable lengths.
Key features
– Compact, lightweight solutions
– Quick, simple set-up
– High accuracy, high power
– Internal zeroing capability
– Fast reading speed
– Wide frequency range: 9 kHz
to 24 GHz (sensor option
dependant)
– Wide dynamic range: –60 to
+44 dBm
– Support internal and external
trigger measurements
1
– Trace display capability enables
easy trigger level and gate setup
for burst signals
– Allows remote measurements
beyond cable length
– Enables monitoring of more than
20 channels simultaneously
– Converts select Keysight
instruments to power meters
– Feature-packed software
provides various capabilities for
easy testing and analysis
– Average power measurements
of CW and modulated signals,
including GSM, EDGE, WLAN
and WiMAX
TM
1. Except U2004A model.