Datasheet

20 | Keysight | U1240 Series Handheld Digital Multimeters - Data Sheet
www.keysight.com/find/handhelddmm
Optional accessories (continued)
U1164A fine-tip test probes
– One pair of fine-tip test probes (red and black). Recommended for use with
Keysight standard test leads.
– Rated CAT II 300 V, 3 A
U1169A test probe leads
– Includes two test leads (red and black), and a pair each of 19-mm and
4-mm test probes.
– Test leads: CAT III 1000 V, CAT IV 600 V, 15 A
– Test probes (19-mm tip): CAT II 1000 V, 15 A
– Test probes (4-mm tip): CAT III 1000 V, CAT IV 600 V, 15 A (highly
recommended for CAT IV environment)
U1180A temperature sensors and probes
Includes thermocouple adapter, thermocouple bead J-type and thermocouple bead
K-type.
– T/C adapter J/K type
– T/C bead J-type: –20 to 200°C
– T/C bead K-type: –20 to 200°C
U1181A immersion temperature probe
– Type K T/C for use in oil and other liquids
– Measurement range: –50 to 700°C
– Includes adapter U1184A for connection to DMM
U1182A industrial surface temperature probe
– Type K T/C for use on still surfaces
– Measurement range: –50 to 400°C
– Includes adapter U1184A for connection to DMM
U1183A air temperature probe
– Type K T/C for use in air and non-caustic gas
– Measurement range: –50 to 800°C
– Includes adapter U1184A for connection to DMM
U1184A temperature probe adapter
– Mini-connector-to-banana-plug adapter for use with DMM
U1185A thermocouple (J-type) and temperature probe adapter
– T/C adapter J/K type
– T/C bead J-type: –20 to 200°C
U1186A thermocouple (K-type) and temperature probe adapter
– T/C adapter J/K type
– T/C bead J-type: –20 to 200°C