Keysight U1177A IR-to-Bluetooth® Adapter Data Sheet
Introduction Keysight Technologies, Inc. U1177A Infrared (IR)-to-Bluetooth adapter offers wireless remote connectivity solution via Bluetooth connection simply by attaching the adapter to the IR port of a Keysight handheld digital multimeter. The wireless remote connectivity is set up when a Keysight handheld digital multimeter is connected to U1177A and an Android device (tablet or smart phone) with the installed software. Every U1177A also has a unique Media Access Control (MAC) address.
03 | Keysight | U1177A IR-to-Bluetooth® Adapter - Data Sheet Take a closer look Low battery indication: Red LED flashing Bluetooth disconnected: Green LED flashing Bluetooth connected: Green solid LED Bluetooth power off: LED off ON/OFF/Setup slide switch Figure 3.
04 | Keysight | U1177A IR-to-Bluetooth® Adapter - Data Sheet Perform data logging with up to three multimeters – wirelessly and simultaneously! Data logging is an important function for industrial users to capture data streams or plotting trending graphs. These data and graphs are used for analysis to identify intermittent behavior or detect drifts. Keysight Mobile Logger is the free Android application software that logs data and provides trending graphs from Keysight handheld digital multimeters.
05 | Keysight | U1177A IR-to-Bluetooth® Adapter - Data Sheet Specifications Product characteristics Description Radio specification – – – – Operating environment Operating temperature from –20 to 55 °C Storage environment Storage temperature from –40 to 70 °C Relative humidity (R.H.) Relative humidity up to 95% at 40 °C (non-condensing) Power consumption Maximum 130 mVA for two 1.
06 | Keysight | U1177A IR-to-Bluetooth® Adapter - Data Sheet This information is subject to change without notice. © Keysight Technologies, 2013 - 2017 Published in USA, December 5, 2017 5990-9531EN www.keysight.
