Datasheet

07 | Keysight | N8700 Series System DC Power Supplies - Data Sheet
Supplemental Characteristics
N8731A N8732A N8733A N8734A N8735A N8736A
Output response time
Up-prog response time
1
80 ms 80 ms 80 ms 80 ms 80 ms 80 ms
Down-prog response time
Full-load
1
20 ms 100 ms 100 ms 100 ms 160 ms 160 ms
Down-prog response time
No-load
2
500 ms 600 ms 700 ms 800 ms 900 ms 1000 ms
Command response time (add this to the output response time to obtain the total programming time)
100 ms
(typical)
100 ms
(typical)
100 ms
(typical)
100 ms
(typical)
100 ms
(typical)
100 ms
(typical)
Remote sense compensation
2 V 2 V 2 V 2 V 5 V 5 V
Over-voltage protection
Range 0.5-10 V 0.5-12 V 1-18 V 1-24 V 2-36 V 2-44 V
Output ripple and noise
CC rms
3
1300 mA 1200 mA 880 mA 660 mA 300 mA 200 mA
Programming resolution
Measurement resolution
Voltage 0.96 mV 1.2 mV 1.8 mV 2.4 mV 3.6 mV 4.8 mV
Current 48 mA 39.6 mA 26.4 mA 19.8 mA 13.2 mA 10.2 mA
Front panel display accuracy
(4 digits; ± 1 count)
Voltage 40 mV 50 mV 75 mV 100 mV 150 mV 200 mV
Current 2000 mA 1650 mA 1100 mA 825 mA 550 mA 425 mA
Temperature stability (over 8 hours, after a 30 minute warm-up, with constant line, load, and temperature)
Voltage 4 mV 5 mV 7.5 mV 10 mV 15 mV 20 mV
Current 200 mA 165 mA 110 mA 82.5 mA 55 mA 42.5 mA
Temperature coefcient (after a 30 minute warm-up)
Voltage (from rated output voltage) 100 PPM/°C 100 PPM/°C 100 PPM/°C 100 PPM/°C 100 PPM/°C 100 PPM/°C
Current (from rated output current) 200 PPM/°C 200 PPM/°C 200 PPM/°C 200 PPM/°C 200 PPM/°C 200 PPM/°C
1. From 10% to 90% or 90% to 10% of rated output voltage, with rated, resistive load.
2. From 90% to 10% of rated output voltage.
3. For 8 V - 15 V models the ripple is measured from 2 V to rated output voltage and rated output current. For other models, the ripple is mea-
sured at 10 - 100% of rated output voltage and rated output current.