Datasheet

12 | Keysight | N8700 Series System DC Power Supplies - Data Sheet
Supplemental Characteristics (continued)
N8759A N8760A N8761A N8762A
Output response time
Up-prog response time
1
50 ms 50 ms 50 ms 100 ms
Down-prog response time
Full-load
1
100 ms 100 ms 100 ms 200 ms
Down-prog response time
No-load
2
1500 ms 2000 ms 2500 ms 3000 ms
Command response time (add this to the output response time to obtain the total programming time)
100 ms
(typical)
100 ms
(typical)
100 ms
(typical)
100 ms
(typical)
Remote sense compensation
5 V 5 V 5 V 5 V
Over-voltage protection
Range 5-110 V 5-165 V 5-330 V 5-660 V
Output ripple and noise
CC rms
3
100 mA 90 mA 30 mA 15 mA
Programming resolution
Measurement resolution
Voltage 12 mV 18 mV 36 mV 72 mV
Current 6 mA 4.1 mA 2 mA 1 mA
Front panel display accuracy
(4 digits; ± 1 count)
Voltage 500 mV 750 mV 1500 mV 3000 mV
Current 250 mA 170 mA 85 mA 42.5 mA
Temperature stability (over 8 hours, after a 30 minute warm-up, with constant line, load, and temperature)
Voltage 50 mV 75 mV 150 mV 300 mV
Current 25 mA 17 mA 8.5 mA 4.3 mA
Temperature coefcient
Voltage (from rated output voltage) 100 PPM/°C 100 PPM/°C 100 PPM/°C 100 PPM/°C
Current (from rated output current) 100 PPM/°C 100 PPM/°C 100 PPM/°C 100 PPM/°C
1. From 10% to 90% or 90% to 10% of rated output voltage, with rated, resistive load.
2. From 90% to 10% of rated output voltage.
3. For 8 V - 15 V models the ripple is measured from 2 V to rated output voltage and rated output current. For other models, the ripple is mea-
sured at 10 - 100% of rated output voltage and rated output current.