Datasheet

11 | Keysight | N8700 Series System DC Power Supplies - Data Sheet
Supplemental Characteristics
N8754A N8755A N8756A N8757A N8758A
Output response time
Up-prog response time
1
30 ms 30 ms 30 ms 50 ms 50 ms
Down-prog response time
Full-load
1
50 ms 80 ms 80 ms 80 ms 100 ms
Down-prog response time
No-load
2
700 ms 800 ms 900 ms 1000 ms 1200 ms
Command response time (add this to the output response time to obtain the total programming time)
100 ms
(typical)
100 ms
(typical)
100 ms
(typical)
100 ms
(typical)
100 ms
(typical)
Remote sense compensation
2 V 5 V 5 V 5 V 5 V
Over-voltage protection
Range 1-24 V 2-36 V 2-44 V 5-66 V 5-88 V
Output ripple and noise
CC rms
3
1000 mA 460 mA 300 mA 150 mA 120 mA
Programming resolution
Measurement resolution
Voltage 2.4 mV 3.6 mV 4.8 mV 7.2 mV 9.6 mV
Current 30 mA 20.4 mA 15 mA 10.2 mA 7. 8 m A
Front panel display accuracy
(4 digits; ± 1 count)
Voltage 100 mV 150 mV 200 mV 300 mV 400 mV
Current 1250 mA 850 mA 625 mA 425 mA 325 mA
Temperature stability (over 8 hours, after a 30 minute warm-up, with constant line, load, and temperature)
Voltage 10 mV 15 mV 20 mV 30 mV 40 mV
Current 125 mA 85 mA 62.5 mA 42.5 mA 32.5 mA
Temperature coefcient
Voltage (from rated output voltage) 100 PPM/°C 100 PPM/°C 100 PPM/°C 100 PPM/°C 100 PPM/°C
Current (from rated output current) 100 PPM/°C 100 PPM/°C 100 PPM/°C 100 PPM/°C 100 PPM/°C
1. From 10% to 90% or 90% to 10% of rated output voltage, with rated, resistive load.
2. From 90% to 10% of rated output voltage.
3. For 8 V - 15 V models the ripple is measured from 2 V to rated output voltage and rated output current. For other models, the ripple is mea-
sured at 10 - 100% of rated output voltage and rated output current.