Datasheet

N6731B-N6792A DC Power & Load Modules
N6700C-N6705C Mainframes
24 Specifications Guide
Performance Specifications
N6751A/N6752A
N6753A/N6755A
N6754A/N6756A
DC Output Ratings:
Voltage 0 - 50 V 0 - 20 V 0 - 60 V
Current
NOTE 1
0 - 5 A / 0 - 10 A 0 - 50 A 0 - 20 A / 0 - 17A
Power 50 W / 100 W 300 W / 500 W 300 W / 500 W
Output Ripple and Noise (PARD):
(from 20 Hz – 20 MHz)
CV peak-to-peak 4.5 mV 5 mV 6 mV
CV rms 0.35 mV 1 mV 1 mV
Load Effect (Regulation):
(Applies for any output load change, with a maximum load-lead drop of 1V/lead.
The load lead drop reduces the maximum available voltage at the load.
)
Voltage 2 mV 2 mV 2 mV
Current 2 mA 12 mA 5 mA
Source Effect (Regulation):
Voltage 1 mV 0.5 mV 1.2 mV
Current 1 mA 5 mA 2 mA
Programming Accuracy:
(percent of value + offset;
@ 23 °C ±5 °C after 30 minute warm-up. Applies from minimum to maximum programming range at any load.)
Voltage 0.06% + 19 mV 0.06% + 10 mV 0.06% + 25 mV
Current 0.1% + 20 mA 0.1% + 30 mA 0.1% + 12 mA
Voltmeter/Ammeter Measurement Accuracy:
(percent of value + offset;
@ 23 °C ±5 °C. Applies when measuring the default value of 1024 data points with a 20.48
µs time interval.)
Voltage 0.05% + 20 mV 0.05% + 10 mV 0.05% + 25 mV
Current 0.1% + 4 mA 0.1% + 30 mA 0.1% + 8 mA
Load Transient Recovery Time:
(Time to recover to within the settling band following a load change
- from 60% to 100% and from 100% to 60% of full load for model N6751A
- from 50% to 100% and from 100% to 50% of full load for models N6752A through N6756A.)
Settling band ± 75 mV
NOTE 2
± 30 mV
NOTE 3
± 90 mV
NOTE 4
Time
< 100 µs < 100 µs < 100 µs
1
Output current is derated 1% per °C above 40°C.
2
When relay option 761 is installed on Model N6752A, the settling band is ±125 mV.
3
When relay option 760 or 761 is installed on Model N6753A and N6755A, the settling band is ±200 mV.
4
When relay option 760 or 761 is installed on Model N6754A and N6756A, the settling band is ±350 mV.