Datasheet

N6731B-N6792A DC Power & Load Modules
N6700C-N6705C Mainframes
54 Specifications Guide
Performance Specifications
N6783A-BAT
N6783A-MFG
DC Ratings:
Voltage 0 - 8 V 0 - 6 V
Current
NOTE 1
– 2 to +3 A – 2; 0 to +3 A
Power 24 W 18 W
Low current measurement range 150 mA 150 mA
Output Ripple and Noise (PARD):
(from 20 Hz – 20 MHz)
CV peak-to-peak 8 mV 8 mV
CV rms 1.5 mV 1.5 mV
Load Effect (Regulation):
(For any output load change, with a maximum load-lead drop of 0.5V/lead.
The load lead drop reduces the maximum available voltage at the load.)
Voltage 6 mV 6 mV
Current 2 mA 2 mA
Source Effect (Regulation):
Voltage 2 mV 2 mV
Current 1 mA 1 mA
Programming Accuracy:
(@ 23 °C ±5 °C after a 30 minute warm-up.
Applies from minimum to maximum programming range at any load.)
Voltage 0.1% + 10 mV 0.1% + 10 mV
Positive Current 0.1% + 1.8 mA 0.1% + 1.8 mA
Negative Current @ –2 A 0.2% + 1.8 mA N/A
Measurement Accuracy:
(@ 23 °C ±5 °C.
Applies when measuring the default value of 1024 data points with a 20.48 μs time interval.)
Voltage 0.05% + 5 mV 0.05% + 5 mV
Current high range
0.1% + 600 µA 0.1% + 600 µA
Current low range
0.1% + 75 µA 0.1% + 75 µA
Load Transient Recovery:
(Time to recover to within settling band for a load change from 0.15 A to 1.5 A and from 1.5 A to 0.15 A at 6 V output)
Settling band
NOTE 2
± 75 mV ± 75 mV
Time
NOTE 2
< 45 µs < 45 µs
1
Output current is derated 1% per °C above 40°C.
2
When relay Option 761 is installed, the settling band is ± 90 mV. The time is < 75 µs.