Datasheet

N6731B-N6792A DC Power & Load Modules
N6700C-N6705C Mainframes
Specifications Guide 19
Supplemental Characteristics (continued)
N6731B/
N6741B
N6732B/
N6742B
N6733B/
N6743B
N6734B/
N6744B
N6735B/
N6745B
N6736B/
N6746B
Output Ripple and Noise (PARD):
CC rms 8 mA 4 mA 2 mA 2 mA 2 mA 2 mA
Common Mode Noise:
(from 20 Hz – 20 MHz; from either output to chassis)
Rms 1 mA 1 mA 1 mA 1 mA 1 mA 1 mA
Peak-to- peak < 15 mA < 10 mA < 10 mA < 10 mA < 10 mA < 10 mA
Remote Sense
Capability:
Outputs can maintain specifications with up to a 1-volt drop per load lead.
The load lead drop reduces the maximum available voltage at the load.
Series and
Parallel
Operation:
Identically rated outputs can be operated directly in parallel
or can be connected for straight series operation.
Minimum Output Turn-On Delay:
(Time from when any Output On command is received until the output starts turning on)
Without relay 32 ms 32 ms 32 ms 32 ms 32 ms 32 ms
With Option 760 58 ms 58 ms 58 ms 58 ms 58 ms 58 ms
1
Correction On compensates for current flowing into the output capacitor during voltage transients.
2
Stated values apply when the load resistance is at or close to zero. To determine the frequency for larger resistance values, refer to the
User’s Guide under “Measurement System Bandwidth”.
Supplemental Characteristics (N6773A-N6777A)
N6773A
N6774A
N6775A
N6776A
N6777A
Programming Ranges:
Voltage 30 mV – 20.4 V 40 mV – 35.7 V 70 mV – 61.2 V 100 mV– 102 V 145 mV –153 V
Current 30 mA – 15.3 A 15 mA – 8.67 A 7.5 mA – 5.1 A 4.5 mA– 3.06 A 2.75mA–2.04 A
Programming Resolution:
Voltage 7 mV 10 mV 18 mV 28 mV 43 mV
Current 9 mA 6 mA 3 mA 1.5 mA 1 mA
Measurement Resolution:
Voltage 10 mV 18 mV 30 mV 50 mV 77 mV
Current 9 mA 6 mA 3 mA 1.5 mA 1 mA
Programming Temperature Coefficient per °C:
Voltage
0.01% + 0.2 mV 0.01% + 0.5 mV 0.01% + 0.5 mV 0.01% + 1 mV 0.01% + 1 mV
Current
0.01% + 0.5 mA 0.01% + 0.5 mA 0.01% + 0.1 mA 0.01% + 0.1 mA 0.01% + 0.1 mA
Measurement Temperature Coefficient per °C:
Voltage
0.01% + 0.2 mV 0.01% + 0.2 mV 0.01% + 0.5 mV 0.01% + 0.5 mV 0.01% + 0.5 mV
Current
0.01% + 0.5 mA 0.01% + 0.5 mA 0.01% + 0.05 mA 0.01% + 0.05 mA 0.01% + 0.05 mA
Measurement Small Signal Bandwidth:
(– 3 db typical)
Voltage 25 kHz 25 kHz 25 kHz 25 kHz 25 kHz
Correction On
NOTE 1
10 kHz 10 kHz 10 kHz 10 kHz 10 kHz
Current
NOTE 2
25 kHz 25 kHz 25 kHz 25 kHz 25 kHz
Correction On
NOTE 1
2 kHz 2 kHz 2 kHz 2 kHz 2 kHz