Datasheet

Each DC power module in the Keysight
N6705 DC power analyzer has a fully
integrated voltmeter and ammeter to
measure the actual voltage and current
being sourced out of the DC output into
the DUT. Because this voltmeter/ammeter
function is built in, it is easy to make
measurements without additional wires
or the added complexity of current sense
resistors or current shunts. The accuracy
of the voltage and current measurements
are based on the type of module that is
installed (basic, high-performance, preci-
sion, or SMU). You can find the accuracy
specification in the tables starting on page
17 under “Voltage Measurement Accuracy”
and “Current Measurement Accuracy.”*
Voltmeter/Ammeter: Meter View
Figure 2. In Meter View, all 4 outputs can be
viewed simultaneously. The both measured
values for voltage and current and setting for
voltage and current are displayed for each
output.
Figure 3. In Meter View, you can also view
an enlarged view of one channel, displaying
many settings and measured values, for
that channel. A summary is shown for the
other three channels.
* Complete specifications are available at http://literature.cdn.keysight.com/litweb/pdf/N6700-90001.pdf
5 | Keysight | N6700 Modular Power System Family - Data Sheet