Datasheet

N6730/40/70 basic series
Use the N6730/40/70 DC power
modules for basic applications –
Now with voltages up to 150 V
Not all testing requires high-performance
power supplies. When your budget is tight
and when speed and accuracy are a lower
consideration, the N6730 Series of 50 W
DC power modules, the N6740 Series of
100 W DC power modules, and the N6770
Series of 300 W DC power modules are an
economical solution that give you clean,
reliable DC power.
The N6730/40/70 series DC power
modules provide programmable voltage
and current, measurement and protection
features at a very economical price. These
power modules offer a wide range of
voltage, current, and power outputs. In
oscilloscope mode, they can be configured
to display either a voltage or a current
trace.
N6750 high-performance series
Use the N6750 DC power
modules for applications where
the power supply plays a critical
role – Now with available power
up to 500 W
The Keysight N6750 series of high-
performance, autoranging DC power
modules provide low noise, high accuracy,
and output voltage changes that are up
to 10 to 50 times faster than other power
supplies. Additionally, autoranging output
capabilities enable one power supply to
do the job of several traditional power
supplies.
Choosing the Right DC Power Modules to Meet Your Testing Needs
The N6750 series combine the widest
arbitrary waveform generator bandwidth,
available power up to 500 W, and high-
accuracy measurements. In oscilloscope
mode, they can be configured to display
either a voltage or a current trace.
N6760 precision series
Use the N6760 DC power
modules for applications where
precision low-level performance
is required – Now with available
power up to 500 W
The N6760 precision DC power modules
provide dual ranges on both programming
and measurement. In the low range, these
power supplies provide 16-bit voltage and
current programming, and 18-bit mea-
surements precision in the milliampere
and microampere region. They are ideally
suited for semiconductor and passive
device testing, or where a precisely
controlled output and highly accurate,
precise, measurements are needed during
test.
The N6760 precision DC power modules
also provide fast output changes for wide
arbitrary waveform generator bandwidth.
In oscilloscope mode, the precision
DC power modules offer the ability to
view both a voltage and a current trace
simultaneously.
N6780 SMU series
Use the N6780 source/measure
units for the most demanding
applications where multi-
quadrant operation and high
precision are required
The N6780 series of source/measure units
offer the highest level of performance in
the N6700 series. These SMUs feature
highly accurate measurements down to
nanoamperes, while providing operation as
a DC voltage source, DC current source,
and electronic load.
For details on these products and how
they can be used for applications includ-
ing battery drain analysis and functional
test, visit www.keysight.com/nd/N6780
and download the N6780 Series Source/
Measure Units (SMUs) for the N6700
Modular Power System Data Sheet,
literature number 5990-5829EN.
N6783 application-specic
series
For details on these products and how
they can be used for specific applica-
tions visit
www.keysight.com/find/N6783A-BAT
www.keysight.com/find/N6783A-MFG
and download the N6783A-BAT Data
Sheet, 5990-8662EN and the N6783A-
MFG Data Sheet, 5990-8643EN.
Figure 14. The basic series.
Figure 15. The N6750 high-performance
series and N6760 precision series DC power
modules that are ≥ 300 W each occupy two
modules slots within the mainframe. All
other modules occupy one module slot.
14 | Keysight | N6700 Modular Power System Family - Data Sheet