Datasheet

Front Panel
In addition to full control over its three
standard interfaces, the N6700 has a full
featured front panel to permit easy manual
operation for test prototyping, debugging,
and troubleshooting when used in an ATE
system. You can have confidence that the
N6700 is working properly because you
can view the settings and actual output
values on all four outputs at the same time.
Quieter Fans To Keep Noise
Down
To reduce acoustic noise, the N6700
mainframes employ fan speed control.
When operating at less than full output
power, the cooling fans spin slower and
generate less noise.
Universal AC Input
The N6700 has a universal input that
operates from 100-240 Vac, 50/60/400 Hz.
There are no switches to set or fuses to
change when switching from one voltage
standard to another. The AC input employs
power factor correction.
Figure 3. Front panel with up to 4 channels displayed simultaneously (Picture shows 3 channels installed.)
Figure 5. Quick disconnects for power and sense leads
Quick Disconnects
Each power module has quick disconnects
for easy system setup and maintenance.
Rack Mount Kit
The N6700 is easily rack-mounted using
the N6709C rack mount kit. This kit
provides all the necessary hardware to
rack mount one N6700 mainframe in only
1U of rack space. This rack mount kit
includes front rack ears and rear supports
which take the place of standard rack rails
and/or slides. Note that standard rack
rails or slides are not compatible with the
N6700 because of its 1U size and airflow
requirements.
Page 5
Find us at www.keysight.com